acoustica

®

the quiet Australian

Copyright Acoustica® 2006

Safety data

Thermal White Batts conform to the building code of Australia as tested to AS 1530 Part 3,

• Ignitability (0-20) = 0
• Spread of Flame (0-10) = 0
• Heat Evolved (0-10) = 0
• Smoke Developed (0-10) = 0-1

Acoustica^® Thermal White Batts are completely safe to install. They do not contain fibreglass or formaldehyde and are completely dust free and non-allergenic.

White Batts are unaffected by water and have a life span of over 50 years.

Acoustica^® Thermal Polyester White Batts

Acoustica^® Thermal White Batts are installed in ceilings, wall cavities and underfloor to provide thermal insulation and acoustic damping. Acoustica^® Thermal White Batts are available with or without an aluminium foil facing.

Acoustica^® Thermal White Batts are available in a wide range of sizes to suit all stud and joist spacing, with thermal ratings from R0.5 to R3.5 or greater.

The thermally bonded polyester insulation also acts as a sound absorber thus improving the STC rating of the wall, ceiling or floor to which it is installed.

Acoustica^® Thermal White Batts retain strength over time and will not sag within the wall cavity. White Batts are non-corrosive, will not rot, decay, be subjected to mould or contain vermin or insects. 

Acoustica^® Thermal White Batts are simple to install & safe to handle. Thermal White Batts can be either friction-fit or stapled into place. Trimming & fabrication can be done with a sharp knife or electric scissors.

Download White Batts Brochure (PDF)

Download the latest Adobe Acrobat Reader